[Tue Nov 19 09:22:39 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:22:39 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:22:39 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:22:39 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:22:39 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:22:39 2024] ata1.00: limiting speed to UDMA/100:PIO4
[Tue Nov 19 09:22:40 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:22:40 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:22:40 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:22:40 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:22:40 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:22:40 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:22:40 2024]  sda: sda1 sda2 sda3
[Tue Nov 19 09:22:40 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:22:41 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:22:47 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:22:53 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:22:53 2024] ata1.00: disable device
[Tue Nov 19 09:22:58 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:22:59 2024] ata1: SATA link down (SStatus 0 SControl 300)
[Tue Nov 19 09:22:59 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:22:59 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:22:59 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:23:00 2024] ata1: SATA link down (SStatus 0 SControl 310)
[Tue Nov 19 09:23:00 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:23:01 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:01 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[Tue Nov 19 09:23:01 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[Tue Nov 19 09:23:01 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:23:01 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:23:01 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:23:01 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:23:01 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:23:01 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:23:01 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:23:01 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:23:01 2024]  sda: sda1 sda2 sda3
[Tue Nov 19 09:23:01 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:23:01 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:01 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:23:02 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:02 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:23:03 2024] ata1: SATA link down (SStatus 0 SControl 310)
[Tue Nov 19 09:23:03 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:03 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:23:03 2024] ata1.00: limiting speed to UDMA/100:PIO4
[Tue Nov 19 09:23:04 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:04 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:23:05 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:11 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:16 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:16 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:23:16 2024] ata1.00: limiting speed to UDMA/33:PIO4
[Tue Nov 19 09:23:17 2024] ata1: SATA link down (SStatus 0 SControl 310)
[Tue Nov 19 09:23:17 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:17 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:23:18 2024] ata1: SATA link down (SStatus 0 SControl 310)
[Tue Nov 19 09:23:24 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:24 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:23:25 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:30 2024] ata1: SATA link down (SStatus 0 SControl 310)
[Tue Nov 19 09:23:31 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:31 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:23:32 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:37 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:43 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:43 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:23:44 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:44 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:23:45 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:51 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:57 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:23:57 2024] ata1.00: disable device
[Tue Nov 19 09:24:02 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:24:02 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[Tue Nov 19 09:24:02 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[Tue Nov 19 09:24:02 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:24:02 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:24:02 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:24:02 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:24:02 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:24:02 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:24:02 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:24:02 2024] ata1.00: limiting speed to UDMA/100:PIO4
[Tue Nov 19 09:24:02 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:24:03 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:24:03 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:24:03 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:24:03 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:24:03 2024]  sda: sda1 sda2 sda3
[Tue Nov 19 09:24:03 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:24:04 2024] ata1: SATA link down (SStatus 0 SControl 300)
[Tue Nov 19 09:24:10 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:24:16 2024] ata1: SATA link down (SStatus 0 SControl 300)
[Tue Nov 19 09:24:16 2024] ata1.00: disable device
[Tue Nov 19 09:24:21 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:24:22 2024] ata1: SATA link down (SStatus 0 SControl 300)
[Tue Nov 19 09:24:22 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:24:22 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:24:22 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:24:23 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:23 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:24:24 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:24 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[Tue Nov 19 09:24:24 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[Tue Nov 19 09:24:24 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:24:24 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:24:24 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:24:24 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:24:24 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:24:24 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:24:24 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:24:24 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:24:25 2024] ata1: SATA link down (SStatus 0 SControl 310)
[Tue Nov 19 09:24:31 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:31 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:24:31 2024] ata1.00: limiting speed to UDMA/100:PIO4
[Tue Nov 19 09:24:32 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:38 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:38 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:24:38 2024] ata1.00: limiting speed to UDMA/33:PIO4
[Tue Nov 19 09:24:39 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:39 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:24:39 2024]  sda: sda1 sda2 sda3
[Tue Nov 19 09:24:39 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:24:40 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:40 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:24:41 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:41 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:24:42 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:42 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:24:42 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:48 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:48 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:24:49 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:54 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:54 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:24:55 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:55 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:24:56 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:56 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:24:57 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:57 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:24:58 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:58 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:24:59 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:24:59 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:00 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:00 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:00 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:00 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:01 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:01 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:02 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:02 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:03 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:03 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:04 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:09 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:09 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:10 2024] ata1: SATA link down (SStatus 0 SControl 310)
[Tue Nov 19 09:25:16 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:16 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:17 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh reset (start)
[Tue Nov 19 09:25:17 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:18 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[Tue Nov 19 09:25:18 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh reset (done)
[Tue Nov 19 09:25:20 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh status (start)
[Tue Nov 19 09:25:21 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh status (done)
[Tue Nov 19 09:25:21 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh  (start)
[Tue Nov 19 09:25:22 2024] VFIO - User Level meta-driver version: 0.3
[Tue Nov 19 09:25:22 2024] ioatdma 0000:00:04.7: Removing dma and dca services
[Tue Nov 19 09:25:22 2024] ioatdma 0000:00:04.6: Removing dma and dca services
[Tue Nov 19 09:25:22 2024] ioatdma 0000:00:04.5: Removing dma and dca services
[Tue Nov 19 09:25:22 2024] ioatdma 0000:00:04.4: Removing dma and dca services
[Tue Nov 19 09:25:22 2024] ioatdma 0000:00:04.3: Removing dma and dca services
[Tue Nov 19 09:25:22 2024] ioatdma 0000:00:04.2: Removing dma and dca services
[Tue Nov 19 09:25:22 2024] ioatdma 0000:00:04.1: Removing dma and dca services
[Tue Nov 19 09:25:22 2024] ioatdma 0000:00:04.0: Removing dma and dca services
[Tue Nov 19 09:25:22 2024] ioatdma 0000:80:04.7: Removing dma and dca services
[Tue Nov 19 09:25:22 2024] ioatdma 0000:80:04.6: Removing dma and dca services
[Tue Nov 19 09:25:22 2024] ioatdma 0000:80:04.5: Removing dma and dca services
[Tue Nov 19 09:25:22 2024] ioatdma 0000:80:04.4: Removing dma and dca services
[Tue Nov 19 09:25:22 2024] ioatdma 0000:80:04.3: Removing dma and dca services
[Tue Nov 19 09:25:22 2024] ioatdma 0000:80:04.2: Removing dma and dca services
[Tue Nov 19 09:25:22 2024] ioatdma 0000:80:04.1: Removing dma and dca services
[Tue Nov 19 09:25:22 2024] ioatdma 0000:80:04.0: Removing dma and dca services
[Tue Nov 19 09:25:23 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:23 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:23 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[Tue Nov 19 09:25:23 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh  (done)
[Tue Nov 19 09:25:23 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:23 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:24 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:24 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:24 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh reset (start)
[Tue Nov 19 09:25:25 2024] nvme nvme0: pci function 0000:84:00.0
[Tue Nov 19 09:25:25 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:25 2024] nvme nvme0: 32/0/0 default/read/poll queues
[Tue Nov 19 09:25:25 2024] nvme nvme0: Ignoring bogus Namespace Identifiers
[Tue Nov 19 09:25:25 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:26 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:26 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:27 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[Tue Nov 19 09:25:27 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh reset (done)
[Tue Nov 19 09:25:27 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh  (start)
[Tue Nov 19 09:25:27 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:27 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:28 2024] ioatdma 0000:00:04.7: Removing dma and dca services
[Tue Nov 19 09:25:28 2024] ioatdma 0000:00:04.6: Removing dma and dca services
[Tue Nov 19 09:25:28 2024] ioatdma 0000:00:04.5: Removing dma and dca services
[Tue Nov 19 09:25:28 2024] ioatdma 0000:00:04.4: Removing dma and dca services
[Tue Nov 19 09:25:28 2024] ioatdma 0000:00:04.3: Removing dma and dca services
[Tue Nov 19 09:25:28 2024] ioatdma 0000:00:04.2: Removing dma and dca services
[Tue Nov 19 09:25:28 2024] ioatdma 0000:00:04.1: Removing dma and dca services
[Tue Nov 19 09:25:28 2024] ioatdma 0000:00:04.0: Removing dma and dca services
[Tue Nov 19 09:25:28 2024] ioatdma 0000:80:04.7: Removing dma and dca services
[Tue Nov 19 09:25:28 2024] ioatdma 0000:80:04.6: Removing dma and dca services
[Tue Nov 19 09:25:28 2024] ioatdma 0000:80:04.5: Removing dma and dca services
[Tue Nov 19 09:25:28 2024] ioatdma 0000:80:04.4: Removing dma and dca services
[Tue Nov 19 09:25:28 2024] ioatdma 0000:80:04.3: Removing dma and dca services
[Tue Nov 19 09:25:28 2024] ioatdma 0000:80:04.2: Removing dma and dca services
[Tue Nov 19 09:25:28 2024] ioatdma 0000:80:04.1: Removing dma and dca services
[Tue Nov 19 09:25:28 2024] ioatdma 0000:80:04.0: Removing dma and dca services
[Tue Nov 19 09:25:28 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:28 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:29 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[Tue Nov 19 09:25:29 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh  (done)
[Tue Nov 19 09:25:29 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:29 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:30 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:35 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:41 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:41 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:42 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:48 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:48 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:25:49 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:25:54 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:00 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:00 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:26:01 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:01 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:26:02 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:02 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:26:03 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:03 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:26:03 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:04 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:26:05 2024] ata1: SATA link down (SStatus 0 SControl 310)
[Tue Nov 19 09:26:10 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:10 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:26:11 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:11 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:26:12 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:12 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:26:13 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:18 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:24 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:24 2024] ata1.00: disable device
[Tue Nov 19 09:26:30 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:26:30 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:26:30 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:26:31 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:31 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:26:32 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:32 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:26:33 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:33 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[Tue Nov 19 09:26:33 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[Tue Nov 19 09:26:33 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:26:33 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:26:33 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:26:33 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:26:33 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:26:33 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:26:33 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:26:33 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:26:33 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:26:33 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:26:34 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:40 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:46 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:46 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:26:46 2024] ata1.00: limiting speed to UDMA/100:PIO4
[Tue Nov 19 09:26:46 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:46 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:26:46 2024]  sda: sda1 sda2 sda3
[Tue Nov 19 09:26:46 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:26:47 2024] ata1: SATA link down (SStatus 0 SControl 310)
[Tue Nov 19 09:26:53 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:53 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:26:53 2024] ata1.00: limiting speed to UDMA/33:PIO4
[Tue Nov 19 09:26:53 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:26:53 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:26:54 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:27:00 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:27:00 2024] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[Tue Nov 19 09:27:00 2024] ata1.00: revalidation failed (errno=-5)
[Tue Nov 19 09:27:05 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:27:05 2024] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[Tue Nov 19 09:27:06 2024] ata1.00: revalidation failed (errno=-5)
[Tue Nov 19 09:27:06 2024] ata1.00: disable device
[Tue Nov 19 09:27:11 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:27:11 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[Tue Nov 19 09:27:11 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[Tue Nov 19 09:27:11 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:27:11 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:27:11 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:27:11 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:27:11 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:27:11 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:27:11 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:27:11 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:27:11 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:27:11 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:27:11 2024]  sda: sda1 sda2 sda3
[Tue Nov 19 09:27:11 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:27:12 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:27:12 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:27:13 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:27:19 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:27:19 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:27:19 2024] ata1.00: limiting speed to UDMA/100:PIO4
[Tue Nov 19 09:27:20 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:27:25 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:27:25 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:27:26 2024] ata1.00: limiting speed to UDMA/33:PIO4
[Tue Nov 19 09:27:26 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:27:32 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:27:38 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:27:38 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:27:39 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:27:44 2024] nbd0: detected capacity change from 0 to 131072
[Tue Nov 19 09:27:44 2024] block nbd0: Other side returned error (5)
[Tue Nov 19 09:27:44 2024] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[Tue Nov 19 09:27:44 2024] Buffer I/O error on dev nbd0, logical block 0, async page read
[Tue Nov 19 09:27:44 2024] nbd1: detected capacity change from 0 to 131072
[Tue Nov 19 09:27:44 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:27:44 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:27:45 2024] block nbd0: NBD_DISCONNECT
[Tue Nov 19 09:27:45 2024] block nbd0: Disconnected due to user request.
[Tue Nov 19 09:27:45 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:27:45 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:27:45 2024] block nbd1: NBD_DISCONNECT
[Tue Nov 19 09:27:45 2024] block nbd1: Disconnected due to user request.
[Tue Nov 19 09:27:46 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:27:51 2024] nbd0: detected capacity change from 0 to 131072
[Tue Nov 19 09:27:51 2024] block nbd0: Other side returned error (5)
[Tue Nov 19 09:27:51 2024] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[Tue Nov 19 09:27:51 2024] Buffer I/O error on dev nbd0, logical block 0, async page read
[Tue Nov 19 09:27:51 2024] nbd1: detected capacity change from 0 to 131072
[Tue Nov 19 09:27:52 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:27:52 2024] block nbd0: NBD_DISCONNECT
[Tue Nov 19 09:27:52 2024] block nbd0: Disconnected due to user request.
[Tue Nov 19 09:27:52 2024] block nbd1: NBD_DISCONNECT
[Tue Nov 19 09:27:52 2024] block nbd1: Disconnected due to user request.
[Tue Nov 19 09:27:57 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:27:57 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:27:58 2024] nbd0: detected capacity change from 0 to 131072
[Tue Nov 19 09:27:58 2024] block nbd0: Other side returned error (5)
[Tue Nov 19 09:27:58 2024] I/O error, dev nbd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[Tue Nov 19 09:27:58 2024] Buffer I/O error on dev nbd0, logical block 0, async page read
[Tue Nov 19 09:27:58 2024] nbd1: detected capacity change from 0 to 131072
[Tue Nov 19 09:27:59 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:27:59 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:27:59 2024] block nbd0: NBD_DISCONNECT
[Tue Nov 19 09:27:59 2024] block nbd0: Disconnected due to user request.
[Tue Nov 19 09:28:00 2024] block nbd1: NBD_DISCONNECT
[Tue Nov 19 09:28:00 2024] block nbd1: Disconnected due to user request.
[Tue Nov 19 09:28:00 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:28:00 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:28:01 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:28:01 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:28:02 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:28:07 2024] ata1: SATA link down (SStatus 0 SControl 300)
[Tue Nov 19 09:28:07 2024] ata1: limiting SATA link speed to <unknown>
[Tue Nov 19 09:28:13 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0)
[Tue Nov 19 09:28:13 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:28:14 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0)
[Tue Nov 19 09:28:14 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:28:15 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0)
[Tue Nov 19 09:28:20 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0)
[Tue Nov 19 09:28:26 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0)
[Tue Nov 19 09:28:26 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:28:31 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0)
[Tue Nov 19 09:28:31 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:28:32 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0)
[Tue Nov 19 09:28:37 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0)
[Tue Nov 19 09:28:37 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:28:37 2024] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[Tue Nov 19 09:28:37 2024] ata1.00: revalidation failed (errno=-5)
[Tue Nov 19 09:28:39 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0)
[Tue Nov 19 09:28:39 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:28:40 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0)
[Tue Nov 19 09:28:40 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:28:41 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0)
[Tue Nov 19 09:28:41 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:28:42 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0)
[Tue Nov 19 09:28:48 2024] ata1: SATA link down (SStatus 0 SControl 3F0)
[Tue Nov 19 09:28:48 2024] ata1: limiting SATA link speed to <unknown>
[Tue Nov 19 09:28:54 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:28:54 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:28:54 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:00 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:00 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:01 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:01 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:02 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:02 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:03 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:03 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:04 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:04 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:04 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:04 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:05 2024] ata1: SATA link down (SStatus 0 SControl 3E0)
[Tue Nov 19 09:29:11 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:17 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:17 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:17 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:17 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:18 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:24 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:24 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:25 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:25 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:25 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:25 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:27 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:27 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:27 2024] ata1: SATA link down (SStatus 0 SControl 3E0)
[Tue Nov 19 09:29:33 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:36 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh  (start)
[Tue Nov 19 09:29:37 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[Tue Nov 19 09:29:37 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh  (done)
[Tue Nov 19 09:29:39 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:39 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:39 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:39 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:40 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:46 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:46 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:47 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:47 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:47 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:47 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:48 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:48 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:29:49 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:29:54 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:30:00 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 3E0)
[Tue Nov 19 09:30:00 2024] ata1.00: disable device
[Tue Nov 19 09:30:06 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:30:06 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[Tue Nov 19 09:30:06 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[Tue Nov 19 09:30:06 2024] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[Tue Nov 19 09:30:06 2024] ata1.00: revalidation failed (errno=-5)
[Tue Nov 19 09:30:11 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:30:11 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:30:11 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:30:11 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:30:11 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:30:11 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:30:11 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:30:11 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:30:11 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:30:11 2024] ata1.00: limiting speed to UDMA/100:PIO4
[Tue Nov 19 09:30:12 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:30:12 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:30:12 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:30:12 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:30:12 2024]  sda: sda1 sda2 sda3
[Tue Nov 19 09:30:12 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:30:15 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:30:15 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:30:15 2024] ata1.00: limiting speed to UDMA/33:PIO4
[Tue Nov 19 09:30:15 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:30:21 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:30:27 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:30:27 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:30:28 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:30:32 2024] nbd0: detected capacity change from 0 to 40960000
[Tue Nov 19 09:30:33 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:30:39 2024] ata1: SATA link down (SStatus 0 SControl 300)
[Tue Nov 19 09:30:39 2024] ata1.00: disable device
[Tue Nov 19 09:30:45 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:30:45 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[Tue Nov 19 09:30:45 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[Tue Nov 19 09:30:45 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:30:45 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:30:45 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:30:45 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:30:45 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:30:45 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:30:45 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:30:45 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:30:45 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:30:45 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:30:45 2024]  sda: sda1 sda2 sda3
[Tue Nov 19 09:30:45 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:30:46 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:30:46 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:30:47 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:30:52 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:30:52 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:30:52 2024] ata1.00: limiting speed to UDMA/100:PIO4
[Tue Nov 19 09:30:53 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:30:53 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:30:54 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:30:54 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:30:54 2024] ata1.00: limiting speed to UDMA/33:PIO4
[Tue Nov 19 09:30:55 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:31:01 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:31:01 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:31:02 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:31:02 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:31:03 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:31:03 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:31:04 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:31:04 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:31:05 2024] ata1: SATA link down (SStatus 0 SControl 300)
[Tue Nov 19 09:31:05 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:31:05 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:31:07 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:31:07 2024] GPT:Primary header thinks Alt. header is not at the end of the disk.
[Tue Nov 19 09:31:07 2024] GPT:10485759 != 40959999
[Tue Nov 19 09:31:07 2024] GPT:Alternate GPT header not at the end of the disk.
[Tue Nov 19 09:31:07 2024] GPT:10485759 != 40959999
[Tue Nov 19 09:31:07 2024] GPT: Use GNU Parted to correct GPT errors.
[Tue Nov 19 09:31:07 2024]  nbd0: p1 p2 p3 p4 p5
[Tue Nov 19 09:31:07 2024] block nbd0: NBD_DISCONNECT
[Tue Nov 19 09:31:07 2024] block nbd0: Disconnected due to user request.
[Tue Nov 19 09:31:10 2024] kvm_intel: L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details.
[Tue Nov 19 09:31:12 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:31:18 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:31:18 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:31:19 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:31:25 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:31:25 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:31:26 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:31:31 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:31:31 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:31:32 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:31:38 2024] ata1: SATA link down (SStatus 0 SControl 300)
[Tue Nov 19 09:31:38 2024] ata1: limiting SATA link speed to <unknown>
[Tue Nov 19 09:31:43 2024] ata1: SATA link down (SStatus 0 SControl 3F0)
[Tue Nov 19 09:31:44 2024] ata1.00: disable device
[Tue Nov 19 09:31:49 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:31:50 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:31:50 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:31:51 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:31:51 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[Tue Nov 19 09:31:51 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[Tue Nov 19 09:31:51 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:31:51 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:31:51 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:31:51 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:31:51 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:31:51 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:31:51 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:31:51 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:31:51 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:31:51 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:31:52 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:31:57 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:31:57 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:31:57 2024] ata1.00: limiting speed to UDMA/100:PIO4
[Tue Nov 19 09:31:58 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:31:58 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:31:58 2024]  sda: sda1 sda2 sda3
[Tue Nov 19 09:31:58 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:31:59 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:31:59 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:31:59 2024] ata1.00: limiting speed to UDMA/33:PIO4
[Tue Nov 19 09:32:00 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:32:06 2024] ata1: SATA link down (SStatus 0 SControl 310)
[Tue Nov 19 09:32:06 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:32:06 2024] ata1.00: disable device
[Tue Nov 19 09:32:12 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:32:12 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[Tue Nov 19 09:32:12 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[Tue Nov 19 09:32:12 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:32:12 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:32:12 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:32:12 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:32:12 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:32:12 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:32:12 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:32:12 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:32:12 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:32:12 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:32:12 2024]  sda: sda1 sda2 sda3
[Tue Nov 19 09:32:12 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:32:13 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:32:19 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:32:19 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:32:19 2024] ata1.00: limiting speed to UDMA/100:PIO4
[Tue Nov 19 09:32:20 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:32:26 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:32:26 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:32:26 2024] ata1.00: limiting speed to UDMA/33:PIO4
[Tue Nov 19 09:32:26 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:32:32 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:32:32 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:32:33 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:32:39 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:32:44 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:32:44 2024] ata1.00: disable device
[Tue Nov 19 09:32:50 2024] ata1: SATA link down (SStatus 0 SControl 300)
[Tue Nov 19 09:32:51 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:32:51 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:32:52 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:32:52 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:32:53 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:32:53 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:32:54 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:32:54 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[Tue Nov 19 09:32:54 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[Tue Nov 19 09:32:54 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:32:54 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:32:54 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:32:54 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:32:55 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:32:55 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:32:55 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:32:55 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:32:55 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:32:55 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:32:55 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:32:55 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:32:55 2024]  sda: sda1 sda2 sda3
[Tue Nov 19 09:32:55 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:32:56 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:33:02 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:33:07 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:33:07 2024] ata1.00: disable device
[Tue Nov 19 09:33:13 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:33:13 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[Tue Nov 19 09:33:13 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[Tue Nov 19 09:33:13 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:33:13 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:33:13 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:33:13 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:33:13 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:33:13 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:33:13 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:33:13 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:33:13 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:33:13 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:33:13 2024] ata1.00: limiting speed to UDMA/100:PIO4
[Tue Nov 19 09:33:14 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:33:20 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:33:20 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:33:20 2024] ata1.00: limiting speed to UDMA/33:PIO4
[Tue Nov 19 09:33:21 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:33:26 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:33:32 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:33:32 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:33:32 2024]  sda: sda1 sda2 sda3
[Tue Nov 19 09:33:32 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:33:33 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:33:39 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:33:44 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:33:44 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:33:45 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:33:51 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:33:57 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:33:57 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:33:57 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:34:03 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:34:03 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:34:04 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:34:10 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:34:16 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:34:16 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:34:17 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:34:17 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:34:18 2024] ata1: SATA link down (SStatus 0 SControl 300)
[Tue Nov 19 09:34:18 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:34:24 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:34:24 2024] ata1.00: disable device
[Tue Nov 19 09:34:29 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:34:29 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[Tue Nov 19 09:34:29 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[Tue Nov 19 09:34:29 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:34:29 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:34:29 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:34:29 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:34:29 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:34:29 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:34:30 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:34:30 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:34:30 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:34:30 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:34:30 2024] ata1.00: limiting speed to UDMA/100:PIO4
[Tue Nov 19 09:34:30 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:34:36 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:34:42 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:34:42 2024] ata1.00: disable device
[Tue Nov 19 09:34:48 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:34:48 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:34:48 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:34:49 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:34:49 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:34:50 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:34:50 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:34:51 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:34:51 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[Tue Nov 19 09:34:51 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[Tue Nov 19 09:34:51 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:34:51 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:34:51 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:34:51 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:34:52 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:34:58 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:34:58 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:34:58 2024] ata1.00: limiting speed to UDMA/100:PIO4
[Tue Nov 19 09:34:58 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:35:04 2024] ata1: SATA link down (SStatus 0 SControl 310)
[Tue Nov 19 09:35:04 2024] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
[Tue Nov 19 09:35:04 2024] ata1.00: revalidation failed (errno=-5)
[Tue Nov 19 09:35:10 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:35:10 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:35:10 2024] ata1.00: limiting speed to UDMA/33:PIO4
[Tue Nov 19 09:35:11 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:35:16 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:35:22 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:35:22 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:35:22 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:35:22 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:35:22 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:35:22 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:35:22 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:35:22 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:35:22 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:35:22 2024]  sda: sda1 sda2 sda3
[Tue Nov 19 09:35:22 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:35:23 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:35:23 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:35:24 2024] ata1: SATA link down (SStatus 0 SControl 310)
[Tue Nov 19 09:35:30 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:35:30 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:35:31 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:35:34 2024] perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[Tue Nov 19 09:35:36 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:35:36 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:35:37 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:35:43 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:35:49 2024] ata1: SATA link down (SStatus 0 SControl 310)
[Tue Nov 19 09:35:49 2024] ata1.00: disable device
[Tue Nov 19 09:35:55 2024] ata1: SATA link down (SStatus 0 SControl 300)
[Tue Nov 19 09:35:55 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:35:55 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[Tue Nov 19 09:35:55 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[Tue Nov 19 09:35:55 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:35:55 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:35:55 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:35:55 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:35:55 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:35:55 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:35:55 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:35:55 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:35:56 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:35:56 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:35:56 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:35:56 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:35:57 2024]  sda: sda1 sda2 sda3
[Tue Nov 19 09:35:57 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:35:57 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:36:03 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:36:03 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:36:03 2024] ata1.00: limiting speed to UDMA/100:PIO4
[Tue Nov 19 09:36:04 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:36:10 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:36:10 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:36:10 2024] ata1.00: limiting speed to UDMA/33:PIO4
[Tue Nov 19 09:36:10 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/test/vhost/nvmf/../../../scripts/setup.sh  (start)
[Tue Nov 19 09:36:11 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:36:11 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:36:11 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[Tue Nov 19 09:36:11 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/test/vhost/nvmf/../../../scripts/setup.sh  (done)
[Tue Nov 19 09:36:12 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:36:12 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:36:13 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:36:13 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:36:13 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/test/vhost/nvmf/../../../scripts/setup.sh  (start)
[Tue Nov 19 09:36:13 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:36:14 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[Tue Nov 19 09:36:14 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/test/vhost/nvmf/../../../scripts/setup.sh  (done)
[Tue Nov 19 09:36:14 2024] Key type psk registered
[Tue Nov 19 09:36:19 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:36:25 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:36:25 2024] ata1.00: disable device
[Tue Nov 19 09:36:30 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:36:31 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:36:31 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:36:32 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:36:32 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:36:33 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:36:33 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[Tue Nov 19 09:36:33 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[Tue Nov 19 09:36:33 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:36:33 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:36:33 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:36:33 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:36:33 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:36:33 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:36:33 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:36:33 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:36:34 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:36:34 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:36:34 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:36:34 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:36:34 2024]  sda: sda1 sda2 sda3
[Tue Nov 19 09:36:34 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:36:35 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:36:40 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:36:40 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:36:41 2024] ata1.00: limiting speed to UDMA/100:PIO4
[Tue Nov 19 09:36:41 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:36:47 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:36:53 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:36:53 2024] ata1.00: disable device
[Tue Nov 19 09:36:58 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:36:59 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:36:59 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:37:00 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:37:00 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[Tue Nov 19 09:37:00 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[Tue Nov 19 09:37:00 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:37:00 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:37:00 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:37:00 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:37:00 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:37:00 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:37:00 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:37:00 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:37:00 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:37:01 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:37:07 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:37:12 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:37:12 2024] ata1.00: disable device
[Tue Nov 19 09:37:12 2024] sd 0:0:0:0: rejecting I/O to offline device
[Tue Nov 19 09:37:12 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:37:18 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:37:19 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:37:19 2024] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[Tue Nov 19 09:37:19 2024] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[Tue Nov 19 09:37:19 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:37:19 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:37:19 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:37:19 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:37:19 2024] Key type psk unregistered
[Tue Nov 19 09:37:19 2024] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[Tue Nov 19 09:37:19 2024] sd 0:0:0:0: Attached scsi generic sg0 type 0
[Tue Nov 19 09:37:19 2024] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[Tue Nov 19 09:37:20 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:37:21 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/test/vhost/nvmf/../../../scripts/setup.sh reset (start)
[Tue Nov 19 09:37:22 2024] nvme nvme0: pci function 0000:84:00.0
[Tue Nov 19 09:37:22 2024] nvme nvme0: 32/0/0 default/read/poll queues
[Tue Nov 19 09:37:22 2024] nvme nvme0: Ignoring bogus Namespace Identifiers
[Tue Nov 19 09:37:24 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[Tue Nov 19 09:37:24 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/test/vhost/nvmf/../../../scripts/setup.sh reset (done)
[Tue Nov 19 09:37:25 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:37:25 2024] ata1.00: configured for UDMA/133
[Tue Nov 19 09:37:25 2024] ata1.00: limiting speed to UDMA/100:PIO4
[Tue Nov 19 09:37:26 2024] ata1: SATA link down (SStatus 0 SControl 300)
[Tue Nov 19 09:37:27 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:37:27 2024] ata1.00: configured for UDMA/100
[Tue Nov 19 09:37:27 2024] ata1.00: limiting speed to UDMA/33:PIO4
[Tue Nov 19 09:37:27 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh reset (start)
[Tue Nov 19 09:37:27 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:37:27 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:37:27 2024] sd 0:0:0:0: [sda] Write Protect is off
[Tue Nov 19 09:37:27 2024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[Tue Nov 19 09:37:27 2024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Nov 19 09:37:27 2024] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[Tue Nov 19 09:37:27 2024]  sda: sda1 sda2 sda3
[Tue Nov 19 09:37:27 2024] sd 0:0:0:0: [sda] Attached SCSI disk
[Tue Nov 19 09:37:28 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:37:28 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:37:29 2024] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[Tue Nov 19 09:37:29 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh reset (done)
[Tue Nov 19 09:37:29 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh cleanup (start)
[Tue Nov 19 09:37:29 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:37:30 2024] spdk: /var/jenkins/workspace/vhost-phy-autotest/spdk/scripts/setup.sh cleanup (done)
[Tue Nov 19 09:37:35 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:37:35 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:37:36 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:37:36 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:37:37 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:37:42 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:37:48 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:37:48 2024] ata1.00: configured for UDMA/33
[Tue Nov 19 09:37:49 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:37:55 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:38:00 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:38:00 2024] ata1.00: disable device
[Tue Nov 19 09:38:06 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:38:07 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[Tue Nov 19 09:38:07 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:38:08 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:38:08 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:38:08 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:38:08 2024] ata1: limiting SATA link speed to 1.5 Gbps
[Tue Nov 19 09:38:09 2024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[Tue Nov 19 09:38:09 2024] ata1: EH pending after 5 tries, giving up
[Tue Nov 19 09:38:09 2024] ata1.00: detaching (SCSI 0:0:0:0)
[Tue Nov 19 09:38:09 2024] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[Tue Nov 19 09:38:09 2024] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK